2 Watt 868M / 915M High

amplifier

CC1312 Uart Wireless Module

N533DS CC1312 transceiver high amplifier uart wireless module designed for 169M, 433M, 868M, 915M and 1200MHz band, the wireless module output power up to + 33 dBm, and sensitivity down to -112 dBm at 50 kbps. The wireless module's antenna interface is RF pin or ipex connecter. The hardware interface included UART, SPI, IO and ADC. The wireless module support AT command and Arduino.

N533DS transceiver high amplifier CC1312 module integrated TI CC1312R transceiver chip, high power PA and LNA, suitable for 868M and 915 MHz band. The wireless module support FSK modulation mode and Legacy Long Range mode. N533DS wireless module has + 33 dBm output power and down to -112 dBm sensitivity (rf rate at 50 kbps). The wireless module connected by SPI or Uart port. Two antennas connectors for optional, RF pin or IPEX. The wireless module design for SMD package, it's very small size. The wireless module is suitable for SMT production.

N533DS high power wireless module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N533DS module leads most pins out of CC1312 for secondary development. AT commands support.

N533DS high amplifier CC1312 module (CC1312) is suitable for free frequency band in EU and USA.

CC1312 transceiver Description

The SimpleLink™CC1312R device is a multiprotocol Sub-1 GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY, Wi-SUN, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

• Flexible Sub-1 GHz radio supporting industry standard frequency bands (315 MHz, 433 MHz, 868 MHz, 900 MHz, and more) to meet the industrial needs.

• Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK) including complete SimpleLink™ 15.4-Stack (Sub-1 GHz) solution.

• Maximum transmit power of +14 dBm at Sub-1 GHz with 24.9 mA current consumption.

• Longer battery life wireless applications with low standby current of 0.85 µA and full RAM retention.

• Industrial temperature ready with lowest standby current of 11 µA at 105°C.

• Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current.

• Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.

• Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.

• Excellent radio sensitivity (-121 dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1312R device is part of the SimpleLink™ MCU platform, which consists ofWi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

N533DS high power CC1312 Module Parameters

N533DS CC1312 Module pinout Description

N533DS high power CC1312 module package information

D‍ownloads

N533DS datasheet‍

‍CC1312 SDK Download From TI

Ordering information

N533DS-169M     CC1312+PA+LNA             33dbm, 169Mhz-880Mhz

N533DS-433M     CC1312+PA+LNA             33dbm, 433Mhz-930Mhz

N533DS-868M     CC1312+PA+LNA             33dbm, 860Mhz-880Mhz

N533DS-915M     CC1312+PA+LNA             33dbm, 910Mhz-930Mhz

N533DS-1200M     CC1312+PA+LNA             33dbm, 1150Mhz-1250Mhz

Test method of N533DS module

Take the supporting base plate of Coral Radio technology as an example:

The bottom board of N533DS CC1312 module is T532AP, which integrates USB to serial chip, led, button, burning port and module card port. As shown in the figure:

Range test of N533DS module

N533DS distance test adopts the USB to serial port module shown in the figure below:

The board is composed of USB to serial port backplane, module and antenna. It is connected with the computer through USB cable to send and receive test data and distance.

N533DS module secondary development method

The CC1312 module is stuck on the backplane as shown in the figure, and the IPEX is connected with the antenna. The burning port is connected with xds110 according to the silk screen printing, and then online simulation can be carried out to test the performance of the module.

Module Programming

The schematic diagram of the module base plate can be obtained from our official website.

Please contact us for specific programming information or download it from TI official website www.ti.com.

AT command

The default setting of the module is the wireless serial port code, support at commmand.

If need to use our code directly, please contact us for usage methods.