500 Milliwatts 868M 915MHz CC1312 CC1190 Module

N621PA CC11312 CC1190 module based TI CC1312 transceiver and CC1190, the module designed for 868M and 915Mhz ISM band. The CC1312 CC1190 module has +27 dBm output power and the sensitivity down to -112 dBm at 50 kbps. N621PA CC11312 CC1190 module leads most pins out of CC1312R for secondary development. AT commands support.

N621PA transceiver cc1312 cc1190 module integrated TI CC1312R transceiver chip and CC1190, suitable for 868M and 915 MHz band. The module support FSK modulation and Legacy Long Range mode. N621PA radio module has + 27 dBm output power and down to -112 dBm sensitivity ( at 50 kbps). SPI or Uart port, RF pin or IPEX optional, SMD package,   small size, the module is suitable for SMT production.

N621PA high power radio module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N621PA high power radio module leads most pins out of CC1312R for secondary development. AT commands support.

N621PA (CC1312 cc1190) radio module is suitable for free frequency band in EU and USA.

CC1312 transceiver Description

The CC1312 transceiver device is a cost-effective, ultra-low-power, Sub-1 GHz RF device from Texas Instruments™ that is part of the SimpleLink™ microcontroller (MCU) platform. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set. A one-time integration of the SimpleLink platform enables users to add any combination of devices from the portfolio into their design, allowing 100 percent code reuse when design requirements change. For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the CC1312 device provides excellent battery life and allows long-range operation on small coin-cell batteries and in energy harvesting applications.

The CC1312 transceiver device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1312 device does not come at the expense of RF performance; the CC1312 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1312 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can maximize sleep time.

The power and clock management and radio systems of the CC1312 device require specific configuration and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI recommends using this software framework for all application development on the device. The complete TI-RTOS and device drivers are offered free of charge in source code.

ISM Frequency supported by N621PA module

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)

N621PA Module Parameters

N621PA's CC1190 control Logic

N621PA's Pin Definition

N621PA's ECAD Package

D‍ownloads‍

simplelink_cc13x0_sdk_4_20_02_07

Ordering information

N621PA-868M     CC1312+CC1190             +27 dBm, 860 Mhz - 880 Mhz

N621PA-915M     CC1312+CC1190             +27 dBm, 910 Mhz - 930 Mhz

CC1190 Description

CC1190 is a cost-effective and high-performance RF Front End for low-power and low-voltage wireless applications at 850 - 950 MHz.CC1190 is a range extender for the sub-1 GHz low-power RF transceivers, transmitters, and System-on-Chip devices from Texas Instruments.CC1190 integrates a power amplifier (PA), a low-noise amplifier (LNA), switches, and RF matching for the design of a high-performance wireless systems.CC1190 increases the link budget by providing a power amplifier for increased output power, and an LNA with low noise figure for improved receiver sensitivity.