5 Milliwatts ZigBee/BLE CC2652R Dongle

N732AP CC2652R Zigbee /BLE Dongle based TI CC2652R 2.4 GHz wireless mcu , and USB to uart chip. The   dongle designed for

Zigbee/BLE

2.4G band. It can be debug or program by customizer. The CC2652R dongle has +5 dBm output power and the sensitivity down to -99 dBm at 250 kbps(ZigBee). The dongle support Zigbee 3.0 ,BLE 5.2, thread and so on.

The CC2652R Dongle has a small private USB shell, Integrated buttons and dual color LED 3528, CC2652r, cp2102 and pcb antenna, with the specialized custom shell, it reduced a lot of development troubles, Only the most software programming is needed to quickly push it to the market. Suitable for 802.15.4 edge gateways, sniffers, packet catchers, etc. The USB shell is compact and exquisite, suitable for personal or commercial use. Can be OEM/ODM. The length, width, and height of the shell are 45 x 19 x 8 mm. The color of the shell and buttons can be customized.

N732AP dongle hardware is designed for maximum range, 100m + Range (Low rate and Line of Sight).

N732AP Private Shell By Coral RF

N732AP dongle Master chip CC2652R Features

• Powerful 48 MHz Arm Cortex-M4F processor

• EEMBC CoreMark score: 148

• 352 kB of in-system programmable flash

• 256 kB of ROM for protocols and library functions

• 8 kB of cache SRAM (alternatively available as general-purpose RAM)

• 80 kB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.

• 2-pin cJTAG and JTAG debugging

• Supports over-the-air (OTA) update

• Ultra-low power sensor controller with 4 kB of SRAM

• Sample, store, and process sensor data

• Operation independent from system CPU

• Fast wake-up for low-power operation

• TI-RTOS, drivers, bootloader, Bluetooth 5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application size

• Thread,

• Zigbee ,

• Bluetooth 5.2 Low Energy,

• IEEE 802.15.4,

• IPv6-enabled smart objects (6LoWPAN),

• proprietary systems,

• SimpleLink™ TI 15.4 stack (2.4 GHz),

• and dynamic multiprotocol manager (DMM) driver.

N732AP CC2652R dongle Wireless protocols

• Bluetooth® 5.2 Low Energy

• ZigBee

• 6LoWPAN

• Proprietary Systems

N732AP CC2652R Dongle radio

• -105dBm for Bluetooth® Low Energy 125kbps

• -99dBm for IEEE 802.15.4-2006 2.4 GHz ((OQPSK DSSS1:8, 250 kbps)

N732AP CC2652R Dongle UART baud

• UART baud up to 3mbps.

N732AP CC2652R Dongle Parameters

How to used N732AP Dongle ?

1. N732AP CC2652R Dongle's KEY, LED, DEBUG, SWITCH port circult

1) KEY circult

2) LED circult

3) Debug Port

4, UART port

2. N732AP CC2652R Dongle RF test

step 1:

connect N732AP to XDS110

step 2:

1) Open smart RF studio 7,

2) Open CC2652R interface,

Then you can proceed with RF testing.

3. N732AP CC2652R Dongle UART test

step 1:

Download the fireware to N732AP CC2652R Dongle

step 2:

install CP2102 driver

step 3:

send the data from putty, then can receive data from N732AP dongle.

Download

CC2652R datasheet‍‍‍     

N732AP datasheet

CP2102 DRIVER‍