2 Watt 868M / 915M High Power CC1310 Radio Module

N532DS CC1310 transceiver high power radio module designed for 868M, 915 MHz band. The module up to + 33 dBm output power, and sensitivity down to -112 dBm at 50 kbps.

N532DS transceiver high power module integrated TI CC1310 transceiver chip, high power PA and LNA, suitable for 868M and 915 MHz band. The module support FSK modulation and Legacy Long Range mode. N532DS radio module has + 33 dBm output power and down to -112 dBm sensitivity ( at 50 kbps). SPI or Uart port, RF pin or IPEX optional, SMD package, very small size, the module is suitable for SMT production.

N532DS high power radio module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. N532DS high power radio module leads most pins out of CC1310F128RGZ for secondary development. AT commands support.

N532DS (CC1310) high power radio is suitable for free frequency band in EU and USA.

CC1310 transceiver Description

The CC1310 transceiver device is a cost-effective, ultra-low-power, Sub-1 GHz RF device from Texas Instruments™ that is part of the SimpleLink™ microcontroller (MCU) platform. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set. A one-time integration of the SimpleLink platform enables users to add any combination of devices from the portfolio into their design, allowing 100 percent code reuse when design requirements change. For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the CC1310 device provides excellent battery life and allows long-range operation on small coin-cell batteries and in energy harvesting applications.

The CC1310 transceiver device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can maximize sleep time.

The power and clock management and radio systems of the CC1310 device require specific configuration and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI recommends using this software framework for all application development on the device. The complete TI-RTOS and device drivers are offered free of charge in source code.

ISM Frequency supported by N532DS high power module

868M band: 868 MHz to 870 MHz (China, EU, USA)

                       888 MHz to 889 MHz (Australia)

915M band: 902 MHz to 928 MHz (USA)

N532DS high power Module Parameters

N532DS pinout Description

N532DS high power module package information

D‍ownloads

N532DS datasheet‍

CC1310 Datasheet

simplelink_cc13x0_sdk_4_20_02_07

Ordering information

N532DS-868M     CC1310+PA+LNA             33dbm, 860Mhz-880Mhz

N532DS-915M     CC1310+PA+LNA             33dbm, 910Mhz-930Mhz

Test method of N532DS module

Take the supporting base plate of Coral Radio technology as an example:

The bottom board of N532DS CC1310 module is T532AP, which integrates USB to serial chip, led, button, burning port and module card port. As shown in the figure:

Range test of N532DS module

N532DS distance test adopts the USB to serial port module shown in the figure below:

The board is composed of USB to serial port backplane, module and antenna. It is connected with the computer through USB cable to send and receive test data and distance.

N532DS module secondary development method

The CC1310 module is stuck on the backplane as shown in the figure, and the IPEX is connected with the antenna. The burning port is connected with xds110 according to the silk screen printing, and then online simulation can be carried out to test the performance of the module.

Module Programming

The schematic diagram of the module base plate can be obtained from our official website.

Please contact us for specific programming information or download it from TI official website www.ti.com.

AT command

The default setting of the module is the wireless serial port code, support at commmand.

If need to use our code directly, please contact us for usage methods.