200 Milliwatts FSK CC1312R7+PA Radio Dongle

N538CP FSK Radio Dongle based TI CC1312R7 SUB GHz wireless mcu , PA and USB to uart chip, the FSK dongle designed for 169M, 433M, 868M, 915M and 1200Mhz band. It can be debug or program by customizer. The CC1312R7 wrieless dongle has +24 dBm output power and the sensitivity down to -110 dBm at 50 kbps. The dongle support IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY, Wireless M-Bus, Wi-

SUN, KNX RF, Amazon Sidewalk, proprietary systems, SimpleLink™ TI 15.4 stack (Sub-1 GHz), and dynamic multiprotocol manager (DMM) driver and so on.

The CC1312R7 Dongle has a small private USB shell, Integrated buttons and dual color LED 3528, CC1312r7, PA, cp2102 and pcb antenna, with the specialized custom shell, it reduced a lot of development troubles, Only the most software programming is needed to quickly push it to the market. The USB shell is compact and exquisite, suitable for personal or commercial use. Can be OEM/ODM. The length, width, and height of the shell are 45 x 19 x 8 mm. The color of the shell and buttons can be customized. The dongle suitable for 802.15.4 edge gateways, sniffers, packet catchers, etc.

N538CP dongle hardware is designed for maximum range, 2000m + Range (Low rate and Line of Sight).

The N538CP Private Shell By Coral RF

N538CP's Master chip CC1312R7 Features

• Powerful 48-MHz Arm® Cortex®-M4F processor

• 704KB flash program memory

• 256KB of ROM for protocols and library functions

• 8KB of cache SRAM

• 144KB of ultra-low leakage SRAM with parity for high-reliability operation

• Dynamic multiprotocol manager (DMM) driver

• Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC

• Supports over-the-air upgrade (OTA)

• Autonomous MCU with 4KB of SRAM

• Sample, store, and process sensor data

• Fast wake-up for low-power operation

• Software defined peripherals; capacitive touch, flow meter, LCD

N538CP cc1312R7 dongle Wireless protocols

• Wi-SUN®

• mioty®

• Amazon Sidewalk

• Wireless M-Bus

• SimpleLink™ TI 15.4-stack

• 6LoWPAN

• Proprietary systems

N538CP cc1312R7 Dongle radio

• -110dBm sensitivity at 50kbps

• up to 24dBm output power

N538CP cc1312R7 Dongle UART baud

• UART baud up to 3Mbps.

N538CP cc1312R7 Dongle Parameters

How to used N538CP Dongle ?

1. N538CP cc1312R7 Dongle's KEY, LED, DEBUG, SWITCH port circult

1) KEY circult

2) LED circult

3) Debug Port

4, UART port

5, PA LOGIC circult

2. N538CP cc1312R7 Dongle's RF test

step 1:

connect N538CP debug port to XDS110

step 2:

1) Open smart RF studio 7,

2) Open cc1312R7 interface,

3) SET PA IO

Then you can proceed with RF testing.

3. N538CP cc1312R7 Dongle's UART test

step 1:

Download the fireware to N538CP Dongle's cc1312R7 chip

step 2:

install CP2102 driver

step 3:

send the data from putty by VCP port, then can receive the same data from N538CP dongle.

Download

CC1312R7 datasheet‍‍‍     

N538CP datasheet

CP2102 DRIVER‍