200 Milliwatts FSK CC1312R+PA Dongle

N538BP CC1312R FSK Dongle based TI CC1312R SUB GHz wireless mcu , PA and USB to uart chip, the FSK dongle designed for 169M, 433M, 868M, 915M and 1200Mhz band. It can be debug or program by customize. The CC1312R dongle has +24 dBm output power and the sensitivity down to -110 dBm at 50 kbps. The dongle support IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY, Wireless M-Bus, Wi-

SUN, KNX RF, Amazon Sidewalk, proprietary systems, SimpleLink™ TI 15.4 stack (Sub-1 GHz), and dynamic multiprotocol manager (DMM) driver and so on.

The CC1312R Dongle has a small private USB shell, Integrated buttons and dual color LED 3528, CC1312r, PA, cp2102 and pcb antenna, with the specialized custom shell, it reduced a lot of development troubles, Only the most software programming is needed to quickly push it to the market. The USB shell is compact and exquisite, suitable for personal or commercial use. Can be OEM/ODM. The length, width, and height of the shell are 45 x 19 x 8 mm. The color of the shell and buttons can be customized. The dongle suitable for 802.15.4 edge gateways, sniffers, packet catchers, etc.

N538BP wireless dongle hardware is designed for maximum range, 2000m + Range (Low rate and Line of Sight).

The N538BP Private Shell By Coral RF

N538BP cc1312R dongle Master chip CC1312R Features

• Powerful 48-MHz Arm Cortex-M4F processor

• EEMBC CoreMark score: 148

• 352KB of in-system programmable flash

• 256KB of ROM for protocols and library functions

• 8KB of cache SRAM (alternatively available as general-purpose RAM)

• 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.

• 2-pin cJTAG and JTAG debugging

• Supports over-the-air (OTA) update

• Ultra-low power sensor controller with 4KB of SRAMSample, store, and process sensor data

• Operation independent from system CPU

• Fast wake-up for low-power operation

• TI-RTOS, drivers, bootloader, and IEEE 802.15.4 MAC in ROM for optimized application size

N538BP cc1312R dongle Wireless protocols

• IEEE 802.15.4g,

• IPv6-enabled smart objects (6LoWPAN),

• MIOTY,

• Wireless M-Bus,

• Wi-SUN,

• KNX RF,

• Amazon Sidewalk,

• proprietary systems,

• SimpleLink™ TI 15.4 stack (Sub-1 GHz),

• Dynamic multiprotocol manager (DMM) driver.

N538BP cc1312R Dongle radio

• -110dBm sensitivity at 50kbps

• up to 24dBm output power

N538BP cc1312R Dongle UART baud

• UART baud up to 3Mbps.

N538BP cc1312R Dongle Parameters

How to used N538BP Dongle‍ ?

1. N538BP cc1312R Dongle's KEY, LED, DEBUG, SWITCH port circult

1) KEY circult

2) LED circult

3) Debug Port

4, UART port

5, PA LOGIC circult

2. RF test

step 1:

connect N538BP to XDS110

step 2:

1) Open smart RF studio 7,

2) Open cc1312R interface,

3) SET N538BP cc1312R Dongle Transmitt&Receive contorl IO

Then you can proceed with RF testing.

3. N538BP cc1312R Dongle UART test

step 1:

Download the fireware to N538BP Dongle cc1312R chip

step 2:

install CP2102 VCP driver

step 3:

send the data from putty to VCP uart port, then can receive the same data from N538BP dongle to putty.

Download

CC1312R datasheet‍‍‍     

N538BP datasheet

CP2102 DRIVER‍