1000 Milliwatts cc1120 PA Module, 169/433/868/915Mhz

N517AS module based TI CC1120 narrowband wireless chip, pa, the module designed for 169/433/868/915Mhz narrowband band. It can be program for customize. The N517AS module has +30 dBm output power and the sensitivity down to -124 dBm at 1.2 kbps. The module support long distance data broadcast and thread.

The C1120 module has a small SMD package, Integrated cc1120 and pa and IPEX, it reduced a lot of development troubles.

N517AS module hardware is designed for maximum range, 10000m + Range (Low rate and Line of Sight).

CC1120 Features

• 64 dB at 12.5-kHz Offset

• Blocking Performance: 91 dB at 10 MHz

• Excellent Receiver Sensitivity:

• –124 dBm at 1.2 kbps

• –110 dBm at 50 kbps

• –127 dBm Using Built-in Coding Gain

• –111 dBc/Hz at 10-kHz Offset

  
  

• Suitable for Systems Targeting ETSI Category 1

• Compliance in 169-MHz and 433-MHz Bands

• High Spectral Efficiency (9.6 kbps in 12.5-kHz

• Channel in Compliance With FCC Narrowbanding Mandate)

• Separate 128-Byte RX and TX FIFOs

• Support for Seamless Integration With the CC1190

• Device for Increased Range Giving up to 3-dB

• Improvement in Sensitivity and up to +27-dBm

  
  

• Output Power

• Power Supply Wide Supply Voltage Range (2.0 V to 3.6 V)

• Low Current Consumption:RX: 2 mA in RX Sniff Mode

• RX: 17 mA Peak Current in Low-Power

  
  

• Mode

• RX: 25 mA Peak Current in High-Performance Mode

• TX: 45 mA at +14 dBm

• Power Down: 0.12 µA (0.5 µA With eWOR Timer Running)

• Programmable Output Power up to +16 dBm With 0.4-dB Step Size

• Automatic Output Power Ramping

• Configurable Data Rates: 0 to 200 kbps

• Supported Modulation Formats:

• 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK

• Peripherals and Support FunctionsEnhanced Wake-On-Radio (eWOR)

N517AS CC1120 Module Wireless protocols

• 6LoWPAN,

• IEEE 802.15.4,

• Proprietary,

• Wireless M-Bus

• Sigfox

N517AS CC1120 Module Parameters

N517AS CC1120 Module pinout Description

N517AS Module Package

How to used N517AS Module

1. PA, LNA, SWITCH user's guide

Note: TXEN, RXEN, LNAEN, VTCXO is connect to MCU IO port, the IO is 3.3V cmos level. The max cmos level is 3.6V.

2. VTCXO user's guide

For Power On:

step 1: power the module

step 2: power the VTCXO, delay 2ms

step 3: register the module

step 4: TX and the data

For Power OFF:

step 1: TX and the data

step 2: register the module to power off

step 3: delay 2ms, power off the VTCXO

For WOR or LBT:

step 1:   delay 2ms, power the VTCXO

step 2: run WOR or LBT

step 3: TX and the data,

step 4: register the module

step 5: delay 2ms, power the VTCXO

Note: for more information please contact with us.

3. N517AS Module test user's guide

connect ccdebugger or MCU to N517AS Module

For ccdebugger:

step 1:

step 2 TX data:

step 3 RX data:

For MCU:

Please view the example:

N517AS Code

N517AS File Download

CC1120 datasheet‍‍‍     

N517AS datasheet‍