N406AS based Semtech sx1280. 2400Mhz loRa used.
N406AS designed for 2400MHz LoRa band. Up to 12dBm output power and down to -132dBm sensitivity.
SX1280 module leads all pins out for secondary development.
N406AS is suitable for free frequency band in EU.
SX1280 Description
Long Range 2.4 GHz transceiver
High sensitivity, down to -132dBm
+12.5 DBM, high efficiency pa
Low power consumption, on-chip DC-DC conversion
Support Lora, flrc and (g) FSK modulation
Programmable bit rate
Excellent blocking immunity
Ranging engine and time of flight ranging method
Compatible with ble PHY layer
Low system cost
N406AS Parameters
RF Interface | Parameter | Introduce |
Frequency | 2400MHz | Support ISM |
Output Power | +12dBm | The maximum power 200mW |
Sensitivity | -132dBm | 1.2kbps |
Symbol Rate | 0.3-500kbps | Software programming control |
Deviation | +/-10kHz | Antenna interface |
Distance | 1000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Hardware parameters | Value | Remarks |
Size | 20 x 17 x 3mm | - |
Antenna Interface | IPEX, RF pin | - |
Communication Interface | SPI | Software programming |
Package | SMD | - |
Electrical Parameters | Minimum | Typical | Maximum | Remarks |
Volt | 1.8V | 3.3V | 3.9V |
|
PA Volt | 2.5V | 5V | 6V |
|
Emission Current |
| 100mA |
| Instantaneous power consumption |
Receiving Current |
| 12mA |
| - |
Sleep current |
| 1uA |
| Software programming control |
Working Temperature | -40℃ |
| 85℃ | - |
N406AS Pinout Decription
N406AS Ordering information
N406AS-2400M Sx1280 LoRa, 12dBm, 2400M - 2500MHz