CC2500PA Module, +19dBm, N202AP-2400M

CC2500PA Module, +19dBm, N202AP-2400M

Frequency: 2.4GHZ
Output Power: +19 dBm
Port: SPI
Brand: Coral RF
Modulation: FSK
Package: Plug-in
Model: N202AP-2400M

Radio module based TI CC2500 and CC2591.

N202AP designed for 2400MHz band. Up to 21dBm output power and down to -106dBm sensitivity. Arduino support.

CC2500 module leads all pins out for secondary development.

N202AP is suitable for free frequency band in EU and America.

CC2500 Description

The CC2500 is a low-cost 2.4 GHz transceiver designed for very low-power wireless applications. The circuit is intended for the 2400-2483.5 MHz ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band.

The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kBaud.

CC2500 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on-radio.

The main operating parameters and the 64-byte transmit/receive FIFOs of CC2500 can be controlled via an SPI interface. In a typical system, the CC2500 will be used together with a microcontroller and a few additional passive components.

N202AP Parameters

ProtocolsIEEE 802.15.4
Frequency bands (MHz)2400-2480
TX power (Max) (dBm)20
RX current (lowest) (mA)18
TX current (lowest) (mA)160
Sleep current (lowest) (mA)1
Data rate (Max) (kbps)500
Operating temperature range (C)-30 to 75
Package   Plug-in
Size   31 x 33 x 3mm
Antenna   InterfaceRF pin, SMA


N202AP Ordering information

N202AP-2400M     CC2500 CC2591   FSK, 20dBm, 2400M - 2483MHz

Download datasheet

N620PA cc1310 cc1190 27dbm, 868M, 915M.pdf
N534 CC1310 uart RF dongle.pdf
N530AS CC1310 Module 14dbm.pdf
N532ES CC1310 PALNA Module,30dbm.pdf
N532FS CC1310 PA Module,24dbm.pdf