N516AS radio module based TI CC1120 transceiver, CC1190, and TCXO crystal.
N516AS CC1120 CC1190 transceiver module designed for 868M and 915 Mhz narrowband band. SPI control. The FSK module has +27 dBm output power and the sensitivity down to -126 dBm, WMBUS and Ardunio support.
N516AS module has SMD and plug-in installation mode. The module use narrowband FSK modulation. The N516AS FSK module occupies very little bandwidth.
N516AS hardware is designed for maximum range,10000 m + Range (Line of Sight).
The CC1120 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for Industrial, Scientific, and Medical (ISM) applications and Short Range Device (SRD) frequency bands at 164 to 192 MHz, 274 to 320 MHz, 410 to 480 MHz, and 820 to 960 MHz.
The CC1120 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters of the CC1120 device can be controlled through an SPI interface. In a typical system, the CC1120 device is used with a microcontroller and only a few external passive components.
CC1190 Description
CC1190 is a cost-effective and high-performance RF Front End for low-power and low-voltage wireless applications at 850 - 950 MHz.CC1190 is a range extender for the sub-1 GHz low-power RF transceivers, transmitters, and System-on-Chip devices from Texas Instruments.CC1190 integrates a power amplifier (PA), a low-noise amplifier (LNA), switches, and RF matching for the design of a high-performance wireless systems.CC1190 increases the link budget by providing a power amplifier for increased output power, and an LNA with low noise figure for improved receiver sensitivity.
