Radio module based TI CC2510 and CC2592.

N209AS CC2510 high power module designed for 2400MHz band. Up to +20 dbm output power.

N209AS high power radio module based TI CC2510, CC2592, up to 20dbm output power, designed for 2400MHz band.

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

• Radio

  • High-performance RF transceiver based on the market-leading CC2500

  • Excellent receiver selectivity and blocking performance

  • High sensitivity (−103 dBm at 2.4 kBaud)

  • Programmable data rate up to 500 kBaud

  • Programmable output power up to 1 dBm for all supported frequencies

  • Frequency range: 2400 - 2483.5 MHz

  • Digital RSSI / LQI support

• Current Consumption

  • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
    TX: 16 mA @ −6 dBm output power)

  • 0.3 µA in PM3 (the operating mode with the lowest power consumption)

• MCU, Memory, and Peripherals

  • High performance and low power 8051 microcontroller core.

  • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM

  • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)

  • I2S interface

  • 7 – 12 bit ADC with up to eight inputs

  • 128-bit AES security coprocessor

  • Powerful DMA functionality

  • Two USARTs

  • 16-bit timer with DSM mode

  • Three 8-bit timers

  • Hardware debug support

  • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins

• General

  • Wide supply voltage range (2.0V - 3.6V)

    
    

N209AS Specifications

N209AS datasheet Download‍

PCB layout and Pin define

Ordering information

N209AS-2400M     CC2510+CC2592     20dbm, 2400Mhz-2483Mhz

Files download

N209AS Software code example‍            Download N209AS datasheet Download CC2510 datasheet